Paint & Coating Defoamer
CAS Number: 68855-54-9 (Siloxane emulsion, compound formulation)
Chemical Formula: Siloxane blend, no single fixed formula
Synonyms: Coating antifoam agent, Foam breaker for paint, Latex defoamer
Appearance: Milky white or light yellow viscous liquid
MOQ (Minimum Order Quantity): 1 FCL (Full Container Load)
Paint & Coating Defoamer #CAS68855-54-9 (Siloxane emulsion, compound formulation)
Paint & Coating Defoamer is a high-efficiency foam control additive specially developed for waterborne architectural and industrial coating systems. Most commercial grades are silicone emulsions compounded with polysiloxane, hydrophobic fillers and nonionic surfactants. During latex paint production, high-speed dispersion, sand milling, pumping and continuous stirring trap large volumes of air inside the slurry, forming both visible macro foam and hidden micro foam. If these bubbles remain before film formation, they will lead to pinholes, fish eyes, craters, uneven surface texture and gloss loss once the coating dries. This defoamer quickly penetrates the foam film, lowers local surface tension and breaks the equilibrium of foam, eliminating existing bubbles rapidly while suppressing new foam generation. It strikes a good balance between defoaming power and system compatibility, serving as a critical auxiliary additive to guarantee smooth and defect-free paint surfaces. Our series features stable dispersion, long-lasting foam inhibition and low effective dosage, widely adopted by latex paint factories and coating formulation enterprises.
It delivers excellent adaptability to diverse waterborne systems and shows good compatibility with acrylic emulsion, pure acrylic emulsion, pigments, fillers, thickeners, dispersants and other standard coating additives, without flocculation, demulsification or negative impact on paint storage stability. It can be added in the grinding stage, letdown stage or right before packaging according to different production workflows. It will not impair the gloss, water resistance and weather resistance of the final paint film, effectively lowering reject rates caused by foam-related defects. Multiple grades are available: high-performance silicone grades for demanding defoaming requirements, and non-silicone mineral oil grades for formulas sensitive to silicone contamination. It can withstand high-shear production conditions and long circulation pumping, maintaining stable foam control under acidic and weakly alkaline coating environments. It helps manufacturers raise production efficiency and reduce raw material waste.
Application of Paint & Coating Defoamer
It is widely used in interior and exterior wall latex paints, flat paint, semi-gloss paint and high-gloss architectural coatings. During paint grinding and high-speed stirring, it rapidly removes foam generated by air entrainment, ensuring uniform pigment dispersion and consistent slurry density. In roller coating, brushing and airless spraying construction, it prevents bubbling on wet films and avoids pinholes and shrinkage marks after drying, leaving a smooth and delicate paint surface. For exterior wall coatings, it will not weaken UV resistance and weathering performance, helping the coating retain stable decorative and protective functions under long-term outdoor exposure. It is a standard matching additive for large-scale architectural paint production lines.
It works as foam control agent for primers, textured coatings, waterproof coatings and waterborne wood coatings. Primers and textured coatings usually contain high filler content and high viscosity, which easily trap microbubbles. This defoamer eliminates hidden microfoam inside thick slurries, improves the compactness and adhesion of primers, and prevents hollowing and poor bonding between primer and substrate. For waterborne wood coatings, it preserves the transparency and surface gloss of topcoats, eliminates bubble marks on wood grain, and meets the strict appearance requirements of furniture finishing. It also performs well in waterborne inks and color paste systems to stabilize color spreading and printing outcomes.
It can also be applied in cement-based decorative coatings, putty slurries, gypsum coatings and pigment dispersion systems. In thick decorative renders and colored mortar, it solves foaming problems caused by mechanical spraying and manual scraping, reduces surface defects and improves the texture uniformity of decorative facades. It can be compounded with HPMC, RDP and other mortar additives, fitting integrated production lines for coatings and dry-mix building materials. It efficiently reduces bubble risks brought by mechanical stirring, making it an indispensable additive for one-stop manufacturing of coatings and dry-mix construction chemicals.
This product is non-dangerous goods for transportation. It is packed in 25kg blue plastic drums or 20kg white square plastic pails. Store in a cool, dry and ventilated warehouse, avoid freezing, high temperature and direct sunlight. Keep tightly sealed after opening to prevent oil separation and deterioration. Stir thoroughly before use. A small compatibility test and defoaming test are highly recommended first, and adjust the addition dosage according to formula viscosity and production process.


