Coalescing Agent for Waterborne Coatings
Coalescing Agent for Waterborne Coatings #CAS25265-77-4 (2,2,4-Trimethyl-1,3-pentanediol monoisobutyrate)
Coalescing Agent for Waterborne Coatings, widely known as Texanol or Ester Alcohol C12, is a high-boiling temporary plasticizer custom-made for waterborne emulsion coating systems. It is the most mainstream coalescent raw material in latex paint manufacturing. Its core function is lowering the minimum film-forming temperature (MFT) of acrylic, pure acrylic, styrene-acrylic and vinyl-acrylic emulsions. Under low-temperature construction conditions, latex polymer particles remain rigid and cannot fuse into a continuous film without proper coalescing aid. The resulting coating will turn powdery, cracked and discontinuous after water evaporation. After adding this coalescing agent, it penetrates and swells latex particles, softens polymer beads and facilitates their tight contact and fusion as water evaporates gradually. Once a complete continuous film is formed, the coalescing agent slowly volatilizes out of the coating matrix, and the polymer recovers its original hardness, water resistance and stain resistance. This unique mechanism balances low-temperature film-forming ability and long-term film hardness. Our Ester Alcohol C12 series features high coalescing efficiency, mild odor, uniform slow volatilization, excellent hydrolysis stability and consistent batch quality, which gains wide recognition from architectural coating factories and formulation labs.
It shows outstanding compatibility with various waterborne emulsions, pigments, fillers, thickeners, dispersants, defoamers and other standard coating additives. It will not trigger emulsion demulsification, flocculation, floating color or other adverse defects that damage paint storage stability. It can improve flow and leveling of wet paint, upgrade the scrub resistance, surface gloss and water impermeability of cured paint film. Compared with traditional glycol ether coalescents, it has lower water solubility, less migration inside the film and better resistance to blushing and water whitening. Multiple grades including standard type and low-odor low-VOC grades are available to satisfy strict environmental standards such as indoor odorless paint, children’s paint and EU low-VOC regulations. Normally it is added in the letdown stage after grinding, easy to meter and evenly blend. A reasonable dosage helps formulators optimize formula cost while securing stable film performance in different construction scenarios.
Applitcaion of Coalescing Agent for Waterborne Coatings
It serves as an indispensable additive for interior and exterior architectural latex paints, covering matte paint, satin paint, semi-gloss and high-gloss latex coatings. In winter or low-temperature construction environments, it guarantees the coating can form continuous, dense and intact paint film normally, preventing surface chalking, cracking and poor adhesion caused by insufficient coalescence. It improves scrub resistance and outdoor weathering performance of exterior wall coatings, slowing down paint film aging, chalking and discoloration under long-term UV radiation and rain erosion. It also optimizes touch-up performance of latex paint and reduces color difference between new and old coating layers, widely applied in residential decoration, commercial building renovation and municipal wall coating projects.
It is extensively used in waterborne wood coatings, waterborne primers, textured coatings and waterproof coatings. For waterborne wood topcoat, it helps build transparent, smooth and high-gloss paint film, enhances grain filling effect and avoids film shrinkage and bare wood grain. For primer and high-filler textured coatings, it increases the compactness of base film and strengthens bonding force between primer and substrate. It also works well in waterborne ink and color paste systems, stabilizing film formation of ink layers and preventing cracking after drying.
It can also be applied in cement-based decorative coatings, emulsion putty, waterborne adhesive and other emulsion-based systems. In colored decorative render and elastic exterior wall coatings, it endows the coating with reliable low-temperature flexibility and crack resistance to adapt to expansion and contraction deformation of base walls. It can be matched with HPMC, RDP, defoamer and other additives for integrated coating and dry-mix mortar production lines. It is one of the essential functional additives for waterborne coating formulation, and plays an irreplaceable role in balancing construction adaptability and long-term coating durability.
This product is non-dangerous goods for transportation. It is packed in 200L blue iron drums or 25L white small plastic pails. Store in a cool, dry and ventilated warehouse, keep away from open flame, high temperature and direct sunlight. Keep tightly sealed after opening to prevent volatilization. Stir evenly before use. It is recommended to carry out MFT test, scrub resistance test and compatibility test first, and adjust the addition amount according to emulsion type and ambient construction temperature.


