Paper Defoamer

Synonyms:

  • Fattyalcoholdefoamer

  • Papermaking antifoam agent

  • Papermaking foam suppressor

    Appearance:Milky white emulsion at 25℃.

  • MOQ (Minimum Order Quantity): 1 FCL (Full Container Load)



Product Details

Paper Defoamer

This papermaking defoamer is an oil-in-water emulsion compound composed of silicone active substances, emulsifiers and dispersion aids. It can be evenly dispersed in the aqueous pulp system without stratification under normal stirring. The pH value of 1% aqueous dilution is 6.0 to 8.0, close to neutral. It has low surface tension and excellent foam breaking and foam inhibiting capacity. It can quickly penetrate into the foam film to rupture the foam and restrain new foam generation. It features good thermal stability and acid and alkali resistance, adapting to the wide pH range of papermaking wet-end process. It is compatible with most common papermaking auxiliaries such as reinforcing agents and retention aids, and will not affect the retention and drainage performance of pulp when added at proper dosage. It does not corrode papermaking equipment. Under sealed storage between 0℃ and 40℃, the emulsion stays stable. High-speed shearing, long-time freezing or storage above 45℃ may cause emulsion demulsification and failure. If slight stratification appears after long-term standing, uniform stirring can restore its performance. The shelf life is 12 months.

Applicaion of Paper Defoamer

This silicone‑based papermaking defoamer is specially designed for foam control in the wet‑end process of papermaking. It can rapidly break the existing foam and continuously suppress the generation of new foam in pulp slurry, white water and circulating water systems. Excessive foam will cause uneven sheet formation, pinholes, air pockets, pulp overflow, unstable basis weight, increased fiber loss and poor running performance of the paper machine. This product can effectively solve these problems. It adapts to various pulp systems including wood pulp, bamboo pulp, straw pulp and waste paper pulp, and is suitable for the production of corrugated base paper, kraft paper, board paper, cultural paper, tissue paper and other paper grades. It can be added at multiple feeding points such as pulping tank, white water tank, screen inlet and headbox. It has good compatibility with papermaking reinforcing agents, retention aids, drainage aids and sizing agents within the recommended dosage range. It will not affect paper strength, sizing effect and subsequent processing properties. It maintains stable defoaming performance under high temperature and wide pH conditions of papermaking process. It is recommended to dilute it properly before adding for better dispersion. A small laboratory trial is required before formal mass production to confirm the optimal addition amount and feeding position, so as to avoid adverse impacts such as fish eyes and spots on paper surface caused by excessive dosage.

Fact Factory and Equipment Show

Magnesium oxideCAS:1309-48-4


Leave your messages

Related Products

x

Popular products

x