Gypsum Retarder

CAS Number: 9000-70-8 (Protein based gypsum retarder, compound mixture)

Chemical Formula: Protein macromolecule, no fixed formula

Synonyms: Plaster retarder, Gypsum setting retarder, Gypsum hardening modifier

Appearance: White or light yellow powder

MOQ (Minimum Order Quantity): 1 FCL (Full Container Load)

Product Details

Gypsum Retarder #CAS9000-70-8 (Protein based gypsum retarder, compound mixture)
Gypsum Retarder is a high-efficiency setting regulator specially designed for gypsum-based building materials. The mainstream product is protein-based retarder, which is made from natural protein raw materials through hydrolysis, purification and modification. Gypsum plaster has a fast natural hydration speed, which easily leads to too short construction time, premature setting and scrapping of mixed slurry. When this retarder is added into gypsum systems, its active components will be adsorbed on the surface of gypsum dihydrate crystal nuclei, inhibiting the growth and crosslinking of crystals, thus delaying the hydration and setting reaction of gypsum. It can flexibly adjust the working time of gypsum slurry according to dosage, without seriously reducing the final strength of hardened gypsum. Compared with citric acid retarder, it has more stable retardation effect, less influence on strength development and better adaptability to different gypsum raw materials. It is widely favored by dry-mix factories that produce gypsum plaster, gypsum putty and gypsum self-leveling.

This retarder shows stable performance under different temperature and water-gypsum ratio conditions, and has good compatibility with HPMC, redispersible polymer powder, air-entraining agent and other common gypsum additives. It will not cause abnormal thickening, segregation or poor dispersion of gypsum slurry. The retardation curve is gentle and controllable, avoiding sudden setting after the extended working time. It can effectively solve many on-site construction pain points: insufficient time for manual scraping and leveling, difficult continuous construction for mechanical spraying, and waste of gypsum slurry caused by fast setting. It has low adding dosage, convenient powder mixing, and can be directly added into dry powder formulations. It is suitable for both small-batch manual mixing and large-scale automatic dry-mix production lines.
Application of Gypsum Retarder

It is the core additive for interior gypsum plaster and gypsum skim coat. Gypsum plaster is widely used for wall leveling and base repairing. Without retarder, the slurry will set quickly and cannot be operated smoothly. After adding this retarder, plasterers can get sufficient time for scraping, leveling and trimming. It guarantees smooth construction for large-area wall projects, reduces material waste caused by sudden setting. Meanwhile, it retains the compressive and flexural strength of gypsum after hardening, avoiding the problem of strength attenuation that often occurs with some traditional retarders. It matches well with cellulose ether, improving the overall workability and water retention of gypsum plaster systems.

It is widely used in gypsum self-leveling floor compound and gypsum grout. Gypsum self-leveling requires a long open time to ensure that the slurry can flow freely, spread evenly and discharge bubbles before initial set. This retarder helps to extend the flowable time, makes the floor surface flat and smooth, and reduces marks and unevenness. For gypsum joint filler and caulking mortar, it provides enough time for filling and trimming of gaps between gypsum boards. It is suitable for gypsum board installation, floor renovation, underfloor heating leveling and other projects, and can adapt to the construction rhythm of mechanical pumping and pouring.

It can also be applied in decorative gypsum, gypsum art moldings, gypsum handicrafts and industrial gypsum products. For decorative gypsum and gypsum moldings, slow setting allows workers to finish carving, trimming and surface finishing before hardening. It helps to reproduce delicate patterns and reduce defective products. It is also suitable for special gypsum systems such as high-strength gypsum, anhydrite gypsum and desulfurization gypsum, helping manufacturers make full use of different gypsum raw materials and stabilize product quality. It is an indispensable functional additive for diversified gypsum-based material production.

This product is non-dangerous goods for transportation. It is packed in 25kg paper-plastic composite bags or kraft valve bags. Store in a cool, dry and ventilated warehouse, keep away from moisture and high temperature. Seal the package tightly after opening to prevent moisture absorption and caking. It is recommended to premix with other powder additives before adding into gypsum powder. Conduct small sample tests on setting time and final strength before mass production, as the dosage needs to be adjusted according to gypsum purity and ambient temperature.

Fact Factory and Equipment Show

Magnesium oxideCAS:1309-48-4


Leave your messages

Related Products

x

Popular products

x